Expt 5: Measurement of Turbulent Inverse Diffusion Flame Height

Precautions



  • Ensure that the fuel line is leak proof.

  • Experiments should be conducted in a ventilated room.

  • Keep a fire extinguisher near the experimental setup.

  • Ensure that the needle valves are functioning properly.

  • The fuel flow rate has to be set to a minimum value initially using the needle valve and ignited at the burner exit.

  • The fuel supply has to be stopped when the fuel jet is not getting ignited for a longer time. Then the burner has to be purged with air to avoid accumulation of unburnt fuel getting ignited in an uncontrolled way.